Where to Install Insulation

For those who don’t know, you can install insulation in more areas than you think. Aside from attics and walls, you need to install spray foam insulation Michigan in floors, ceilings, in between interior walls, knee walls, floors over unheated porches or garages, cathedral ceilings, knee above vented crawl spaces, basement walls, and ceilings with unheated spaces. Your objective should be to produce a steady wrap around your house.

However, not all areas can be accessed easily. Attics and ceilings are always great places to begin since both are accessible and heat escapes more in these areas compared to other parts of the house.

Easy to Overlook Places

It is crucial to insulate any space where comfort can be compromised and energy can be lost if you want to achieve maximum thermal efficiency. Oftentimes, the following areas are overlooked.

  • You should insulate junction boxes for convenience outlets and wall switches at outside walls. Between the sheathing and the rear of the box.
  • You also have to insulate openings through building sections. This is the area where ductwork, wiring, or pipes penetrate a building section. To lower air infiltration, insulation needs to be tightly packed into the openings.
  • Before the fixtures are installed, you should insulate first the sidewalls where plumbing fixtures are to be installed.
  • You should also insulate floors over open or unheated spaces such as cantilevered floors, unconditioned basements, porches, or garages.
  • Ceilings and sloped walls or attic areas that are finished as living spaces should be insulated.
  • You should knee walls attic areas finished as living spaces.
  • You also have to insulate walls between unheated garages and living spaces, adjacent lower, places of walls above ceilings, and dormer walls.
  • Ductwork

Probably the simplest place to overlook for insulation in the house is the ductwork. To improve indoor comfort, insulation products such as duct liner, duct wrap, and duct board are utilized. They do this by delivering cooled and heated air from room-to-room at design temperatures, lowering noise such as HVAC equipment noise or cross-talk heard between two rooms, and controlling condensation.

Flat Ceilings and Attics

R-30 and R-38 mineral wool batts or fiberglass are the most common products for flat ceilings and attics. Keep in mind that these products are around 15” up to 24” wide. This is to ensure that the insulation fills the gaps between the trusses’ bottom chords or the ceiling joists. It also extends above and closes over almost every wood member. You can utilize two layers and combine their R-Value if you want to achieve R-values of R-38 or bigger. For instance, if you want an R-49, you can combine an R-30 to an R-19 batt.

You can also use mineral wool or fiberglass loose-fill insulation. You can install this type of insulation using any R-value. But, it is very crucial that the minimum thickness and proper amount of insulation are installed to obtain the right R-Value. You should always talk to a professional to know how to achieve the right R-value for your property.

Is a DIY Spray-in Bed Liner Worth It?

Do you want to add another layer of protection to the bed of your truck? You might be planning doing a DIY spray-in bed liner. Though that’s definitely an option, it might not be the ideal one for your truck.  

Though DIY is sometimes a bit less costly and much simpler, that isn’t the case always with the bed liners in your truck. A Do-It-Yourself bed liner solution has a lot of integral disadvantages and risks that could make other options more enticing.  

Here are several things you have to consider before you do a Do-It-Yourself spray-in bed liner. 

It Might Not Provide Complete Protection 

While you can certainly save a lot of money in Do-It-Yourself spray-in bed liners, this solution doesn’t provide complete protection for your truck’s bed. Though the liner would fully cover the bed of your truck if properly installed, that doesn’t mean it fully protects it. Spray In Bed Liner is excellent for preventing possible rust damage and scratches to the bed of your truck. But, they don’t provide any extra padding and cushioning to protect against impacts and dents from items in the bed.  

It can be More Costly if Done Wrong 

Saving money is often the main reason why people use a Do-It-Yourself spray-in bed liner. However, that may not be always the result. Though we understand that expert spray-in bed liner can be more costly, Do-It-Yourself solutions could be expensive too.  

When it comes to upfront costs, a Do-It-Yourself option is probably the cheapest solution. However, when it comes to upkeep and maintenance, this is where the price of a DIY solution goes expensive.  

You might face problems that need you to redo the installation if you’ve never installed a spray-in bed liner before. This will cost you more money and time.  

It Might Not Last 

The longevity of your truck’s bed liner should be the first thing you have to think about. Professional spray-in bed liners can last for a long period of time. On the other hand, a DIY spray-in liner will usually not last as long compared to having a professional install it. If you do not properly install it, you will start to see wear and tear damage in several months.  

There are a lot of elements that can shorten the lifespan of a DIY bed liner. This includes smudges before the spray dries, improper layering or coating, and imperfections when preparing the bed of your truck. In addition to that, you have to consider the environment. Installing a DIY spray-in bed liner can be a hassle if you do not have an enclosed garage. Leaves and other debris could get into the spray.  

It Does Not Protect The Load 

It is true that Do-It-Yourself spray-in bed liner can prevent the paint of the bed from getting scratched. However, they almost do not do anything to prevent the load from moving around.  

A DIY spray-in bed liner might not be the ideal option for you if you want to utilize your truck to move appliances or furniture.